Thank you for choosing LumaDent! Voting for the 2022 DentalTown© Townie Choice© Awards is now open. Cast your vote now!

Linkage Arm Replacement

Step by step instructions

 

1. Slide female linkage arm off of male half.
2. Remove the screw on the female linkage arm to detach it from the light.
3. Place new female linkage arm onto the light housing.
4. Tighten screw back down to attach female linkage arm back to the light.
5. Remove your mount from your loupes.
6. Separate male linkage arm from mount by backing out the screw.
7. Re-attach by tightening the screw back down.
8. Re-attach your mount to your loupes.
9. Slide the linkage arms back together.
10. Done!

Step by step instructions

  • Slide female linkage arm off of male half.
  • Remove the screw on the female linkage arm to detach it from the light.
  • Place new female linkage arm onto the light housing.
  • Tighten screw back down to attach female linkage arm back to the light.
  • Remove your mount from your loupes.
  • Separate male linkage arm from mount by backing out the screw.
  • Re-attach by tightening the screw back down.
  • Re-attach your mount to your loupes.
  • Slide the linkage arms back together.
  • Done!