For this procedure, please make sure your working area is free from dust or any other particles that could potentially get inside the unit. That being said, it is best to perform this procedure quickly. That will reduce the chance that dust or other particles will get into the unit.
If you notice dust or debris in your HL360 after this procedure is finished, you can re-open it and blow it out with some canned air.
Procedure
- Unscrew the optics module from the HL360.
- Remove the old LED module from the HL360.
- Install the new LED module in its place.
- Screw the optics module back onto the HL360.